| Category |
Details |
| Brand |
Omron |
| Series |
SYSMAC CP Series – CP2E |
| PLC Type |
Compact / Micro Programmable Logic Controller |
| CPU Types |
CP2E-E – Essential, CP2E-S – Standard, CP2E-N – Network |
| E-Type |
Basic machine-control model; 4K-step program capacity and 4K-word data memory. |
| S-Type |
Standard machine-control model suitable for applications involving inverters and servo drives; 8K-step program capacity and 8K-word data memory. |
| N-Type |
Network model with Ethernet and enhanced positioning; 10K-step program capacity and 16K-word data memory. |
| Available Built-in I/O Sizes |
14, 20, 30, 40 and 60 points, depending on CPU type/model. |
| 14-Point Configuration |
8 Digital Inputs + 6 Digital Outputs |
| 20-Point Configuration |
12 Digital Inputs + 8 Digital Outputs |
| 30-Point Configuration |
18 Digital Inputs + 12 Digital Outputs |
| 40-Point Configuration |
24 Digital Inputs + 16 Digital Outputs |
| 60-Point Configuration |
36 Digital Inputs + 24 Digital Outputs |
| Output Types |
Relay, Transistor Sinking (NPN) and, on applicable 24 V DC models, Transistor Sourcing (PNP). |
| Maximum I/O – 30 Point CPU |
Up to 150 I/O points with supported CP1W expansion units |
| Maximum I/O – 40 Point CPU |
Up to 160 I/O points |
| Maximum I/O – 60 Point CPU |
Up to 180 I/O points |
| Expansion Units |
30/40/60-point CPUs support up to 3 CP1W-series Expansion I/O / Expansion Units; 14/20-point models do not support these standard expansion units. |
| Program Language |
Ladder Diagram; Function Blocks can use Ladder and Structured Text definitions. |
| Instruction Set |
Approximately 220 instructions |
| LD Instruction Speed |
Approximately 0.23 μs |
| MOV Instruction Speed |
Approximately 1.76 μs |
| High-Speed Counters |
Supports high-speed pulse counting up to 100 kHz on applicable inputs; exact counter arrangement varies by CPU size/model. |
| Pulse Outputs |
Transistor-output S/N models support positioning pulse outputs up to 100 kHz |
| Pulse Output Axes – N14/N20 |
Up to 2 × 100 kHz outputs |
| Pulse Output Axes – N30/N40/N60 |
Up to 4 × 100 kHz outputs |
| Positioning |
Supports pulse + direction positioning; N-type 30/40/60 models can provide up to 4-axis linear interpolation. |
| PWM Output |
Available on applicable transistor-output S/N CPUs |
| Ethernet |
Built into CP2E-N Network models |
| Ethernet Speed |
10BASE-T / 100BASE-TX
|
| Ethernet Ports – N14/N20 |
1 Ethernet port |
| Ethernet Ports – N30/N40/N60 |
2 Ethernet ports with integrated Layer-2 switching functionality. |
| Ethernet Functions |
Supports TCP/UDP networking and functions including FINS, Socket communication, SNTP and DNS client.
|
| Serial Communication |
Model-dependent RS-232C / RS-485 serial communication |
| Serial Baud Rate |
Up to 115.2 kbps |
| Serial Protocols |
Supports functions such as Host Link, NT Link, no-protocol, Serial PLC Link and Modbus-RTU depending on CPU/interface configuration. |
| Programming Software |
Omron CX-Programmer |
| Software Requirement |
Supported by CX-One 4.51 or later and CX-Programmer 9.72 or later. |
| AC Power Supply Models |
Rated 100–240 V AC, 50/60 Hz |
| AC Operating Voltage Range |
85–264 V AC |
| DC Power Supply Models |
Rated 24 V DC |
| DC Operating Voltage Range |
20.4–26.4 V DC. |
| AC Power Consumption – 14/20 Point |
Up to 15 VA at 100 V AC / 25 VA at 240 V AC |
| AC Power Consumption – 30/40/60 Point |
Up to 50 VA at 100 V AC / 70 VA at 240 V AC |
| DC Power Consumption – 14/20 Point |
Up to 13 W |
| DC Power Consumption – 30/40/60 Point |
Up to 20 W. |
| 24 V Auxiliary Supply |
Applicable 30/40/60-point AC CPUs provide approximately 24 V DC, 300 mA service power; 14/20-point AC CPUs do not provide this auxiliary output. |
| Mounting |
Panel / DIN-track installation |
| Key Features |
Compact design, multiple I/O sizes, Ethernet on N-type, high-speed counters, pulse positioning, serial communication, Modbus support, function blocks, expansion I/O and machine-data collection capability |
| Applications |
Packaging machines, conveyors, filling machines, labeling machines, assembly machines, material handling, production monitoring, traceability systems, machine-data collection, VFD/servo control and general-purpose machine automation |
| Best Suited For |
Small-to-medium machines requiring economical control with optional Ethernet, serial networking, positioning and production-data collection. Omron specifically positions CP2E around flexible production, traceability and monitoring of machine assets. |
